Skip to main content
ELECTRICAL SPEC: NEC CLASS 2 (12V / 24V DC) & IP67 POTTED LED
CCT BINS: 2700K • 3000K • 4000K • 5000K (CRI 90+)info@litnumbers.com
ILLUMINATED HARDWARE SYSTEMS • CLASS 2 DRIVERS • SOLAR KITS

12V/24V Halo LED Digits, Cast Acrylic Backplates & Solar Systems

Compare hardwired constant-voltage channel numerals, single-penetration pre-wired backplates, regulated UL 1310 Class 2 power supplies, and split-collector LiFePO4 solar address kits.

SERIES 01 • INDIVIDUAL CHANNEL DIGITS

IP67 Reverse-Channel Halo-Lit Numerals (5"–12")

CNC-machined 6061-T6 anodized aluminum and marine 316L stainless front shells backed with 8 mm satin-frosted cell-cast PMMA and solid polyurethane-potted CRI 90+ SMD2835 modules in 2700K, 3000K, 4000K, or 5000K.

  • 12V DC or 24V DC constant-voltage (2.0W–2.8W per digit)
  • 0.50 in, 0.75 in, or 1.00 in threaded rear standoffs + paper drill template
  • Ideal where open attic, garage, or drywall access exists behind wall
SERIES 02 • SINGLE-WIRE BACKPLATES

Pre-Bussed Edge-Lit & Sub-Plaque Assemblies

Eliminate drilling two wire holes per digit on solid brick or stone: all parallel bus splices are factory-potted inside a matte architectural aluminum backplate requiring only a single central low-voltage wire penetration.

  • Guarantees high-contrast pale or dark halo backdrop on any cladding
  • Mounts directly over standard single-gang low-voltage mud rings
  • Available in horizontal curb bars or vertical porch column formats
SERIES 03 • POWER & AUTOMATION

UL 1310 Class 2 Drivers, Photocells & PWM Dimmers

Regulated 24W, 60W, and 96W NEMA 3R/4X constant-voltage 12V/24V DC power supplies paired with north-facing silicon photodiode dusk sensors, astronomical wall switches, or flicker-free 2.5 kHz PWM dimmers.

  • Optional AC-to-DC bridge buck regulator for existing 12V AC landscape runs
  • Gel-filled Wago 221 parallel splice enclosures included
  • Short-circuit, overload, and over-temperature auto-recovery protection
SERIES 04 • ZERO-TRENCHING AUTONOMOUS

Cold-Climate LiFePO4 Split-Cord Solar Number Kits

Built for December solstice nights and shaded front porches: a 4.5W tempered-glass monocrystalline solar collector on an adjustable 45°–55° bracket feeds a 3.2V 6,000 mAh LiFePO4 battery pack via a 15-foot weatherproof umbilical cord.

  • Dual-stage evening peak + post-midnight eco discharge (4+ cloudy nights)
  • 2,000+ deep charge cycles—5× standard 18650 lithium-ion longevity
  • Zero electrician trenching on detached gate pillars and stone walls

Request a Custom Illuminated Plaque or Multifamily Driver Schedule

Send your address digits, desired character height, wall material, and power run distance to info@litnumbers.com or submit a custom quote inquiry.